黄冈40cr ingot customization

Network optimisation information.

The ejector plate should have a guide post.

The travel position should be hardened.

If hot work mould steel is required, the upper and lower moulds and positions should be temperature controlled.

For all transport waterways, it is recommended that non-electric dipped nickel or 420 stainless steel be used as the template. This prevents rusting and removes waste.

Requires a straight or sloping body lock.

2,102 moulds (beer up to 1,000,000 beers, large mould quantities)

Detailed mould construction drawings are required.

Minimum hardness of 280 BHN for both die materials.(2 steel/4140 steel, DME#)

Inner moulds of heat resistant mould steel with glue bits should be seen hardened to a minimum of 48 to 52 HRC and the rest of the useful parts should be treated similarly.

The use of straight or angled body locks is recommended.

The following items may or may not be required. Depends on how much of the final product is to be produced. If the following items are used, it is recommended that they should be checked when quoting.

Ejector plate guide pillar.

In-line hard pieces.

Plating water transport holes.

Plating die cavities.